Find Windows System32 Files in Windows XP
1. Launch Windows Explorer. Click the 'Start' button, go to 'Programs' or 'All Programs,' select 'Accessories,' then click on 'Windows Explorer.' Alternatively, open 'My Computer,' copy and paste either of the following file addresses in the My Computer address bar: %SystemRoot%\explorer.exe or C:\WINDOWS\explorer.exe. Then hit 'Enter' on your keyboard.
2. Open the Windows Explorer 'Tools' menu and select 'Folder Options.' Click on the 'View' tab. Select the radio button next to the option to 'Show hidden files and folders.' Deselect the box next to 'Hide protected operating system files (Recommended).' Click 'Apply,' then click 'OK' to close the Folder Options dialog box.
3. Navigate to the Windows System32 folder. In the 'Folder' pane in Windows Explorer, locate and click on 'My Computer,' locate and click 'Local Disk (C:),' locate and click on the 'Windows' folder, locate and click on the 'System32' folder. Alternatively, you could also copy and paste the following file address in the Windows Explorer address bar: C:\WINDOWS\system32. All of the subfolders and files in your Windows System32 folder, both regular files and hidden files, will appear in the right-side window pane. Find the one you want.
Find Windows System32 Files in Windows Vista and Windows 7
4. Open the 'Start' menu and select 'Control Panel.'
5. Click on the 'Appearance and Personalization' link. Then click 'Folder Options.' Go to the 'View' tab. Deselect the box next to 'Hide protected operating system files (Recommended).' In Windows Vista, select 'Show hidden files and folders.' In Windows 7, select 'Show hidden files, folders, and drives.' Click 'OK.'
6. Navigate to the Windows System32 folder. Click the 'Start' button and select 'Computer.' In the left-side window pane, locate and click on 'Computer.' Locate and click on the '(C:)' drive, locate and click on the 'Windows' folder, locate and click on the 'System32' folder. All of the subfolders and files in your Windows System32 folder, both regular files and hidden files, will be displayed on the right. Find the one you want.
Updating Setupx.dll
1. Click the 'Start' button in the bottom left corner of Windows. Look in the 'All Programs' folder, then click the 'Windows Update' icon. Microsoft Internet Explorer will open and load the Windows Update page.
2. Click 'Express Install.' Windows will immediately begin looking for available updates, which can take a while. If Windows discovers any uninstalled service packs or other important updates, click 'Install Updates' when prompted. The installation will begin automatically, but may take a while.
3. Restart your computer if and when you are prompted to do so by Windows at the end of the installation process. If Windows installed any service packs or updates that affect Windows system files, it may have updated setupx.dll.
4. See if your problems related to setupx.dll still occur. If they do, proceed to the next section to restore an earlier working version of the file.
Restoring the Original Setupx.dll
5. Click the 'Start' button in the bottom left corner. Look in 'All Programs,' then in 'Accessories' and finally in 'System Tools.' Click 'System Restore.'
6. Make sure the bubble next to 'Restore my computer to an earlier time' is selected, then click the 'Next' button.
7. Choose a restore point from the calendar by clicking on it. Only the bold dates represent valid restore points. You can choose one from as far back as you like, but you should select a restore point that predates the problems you're having with setupx.dll. Click the 'Next' button after clicking a restore point.
8. Read over your chosen restore information on the confirmation screen, then click 'Next' or 'Finish.' Your computer will restore itself and then reboot, which will take a few minutes.
9. Click the 'OK' button on the confirmation dialog box that appears after rebooting. Check to see if you're still having problems related to setupx.dll. If you are, your best remaining option is to replace the file manually, which is explained in the next section.
Replacing Setupx.dll
10. Open your Web browsing application. Find the link in the Resources section, which redirects to a download location for a working version of setupx.dll. If you prefer to download this file from another location, search for the file name using your chosen search engine. There are several sites that offer replacement versions of the .dll files that are relatively common.
11. Download the file and open it. It will open in the application designated to handle .zip files. Unzip or extract the setupx.dll file to your computer's desktop.
12. Right-click the 'Start' button and select 'Explore.' In the left panel of Windows Explorer, navigate to the system folder for your version of Windows. This is 'C:\Windows\System32' in 32-bit XP and Vista, 'C:\Windows\SysWOW64' in 64-bit XP and Vista, 'C:\WINNT\System32' in NT and 2000, and 'C:\Windows\System' in 95, 98 and ME. When you find this folder, left-click it once.
13. Drag and drop the setupx.dll file from your desktop into the system folder you opened in the previous step. If the original file is present but corrupted, you'll see a message stating that a file by this name already exists. Click the 'Yes' button to replace the old file with the new one.
14. Reboot Windows. Windows will automatically register the new .dll file when it loads, which should correct any remaining problems.
1. Click the 'Start' button and then click the 'All Programs' button.
2. Click the 'Windows Update' icon from the menu.
3. Click the 'Check for updates' button on the left side of the software window.
4. Click the 'Install Updates' button at the bottom of the software window.
5. Restart your system to clear the errors.
6. Insert your Scansoft Paperport installation disc into the computer's optical drive.
7. Follow the prompts to install the software onto your computer.
Manual Management
1. Open the registry by clicking the Windows 'Start' button. Click 'Run' or 'Start Search' (Windows Vista users).
2. Type 'regedit' (Without quotes) and press 'Enter.' That will open your computer's registry.
3. Back up your registry by clicking 'My Computer' on the left panel. Click 'File' and click 'Export.' Type in the name for the backup file and click 'Save.' Before you make changes to the registry, it is always important to create a backup copy that you can come back to in case you make an error.
4. Click the path on the left panel that you want to access to adjust or delete certain registry keys. For example, to modify (adjust) a certain key in the 'HKEY_LOCAL_MACHINE/Software' path, you click the 'HKEY_LOCAL_MACHINE' folder on the left panel and click the 'Software' folder. Right-click the key you want to adjust on the right panel and click 'Modify.' Type in the value data and click 'OK' to save the changes. The value data you have to add all varies depending on the programs you have on your computer and which ones are causing problems. Those values will not be the same for every computer user.
5. Most of the registry entries you would want to delete have been added by viruses, spyware and malware. They may vary depending on which of those components are on your computer.
Delete a registry item by clicking on the path you want on the left panel and right-clicking the registry key on the right panel and selecting 'Delete.' For example, to delete a key in the 'HKEY_LOCAL_MACHINE/Software' path, you click the 'HKEY_LOCAL_MACHINE' folder on the left panel and click 'Software.' Locate the key you want to delete on the right panel and right-click it. Click 'Delete' to remove the registry key.
If you want to search for specific registry entries, press 'F3' to open the search window. Type in the name of the registry entry you want to search for and click 'Find text.' To search for registry entries using 'F3' you need to know the name of the registry entry you are looking for.
6. Click 'File' and click 'Exit' to close the registry.
Automatic Registry Cleaning
7. Download and install CCleaner free (see resources below). CCleaner is an automatic registry cleaner program that removes unnecessary files, and repairs ActiveX and missing DLL files. ActiveX files are Web browser add-on programs that allow you to view videos, photos and download files from different websites. DLL files are support files for many different programs. When they become corrupt, the programs using them do not open properly or crash within minutes of use.
8. Launch your program after it has installed and click the'Registry' button on the left panel. Place a check on all the registry options in the 'Registry Integrity' window.
9. Click 'Scan for Issues' to automatically search for corrupt registry files. Click 'Fix selected issues' when the scan is complete and click 'Yes' to backup your registry.
10. Click 'Fix all Selected Issues' after you have a created a registry backup and click 'OK.' CCleaner will remove unnecessary files and repair corrupt and missing ones. Close the program when the process is complete.
1. Click "Start," "Settings" and then "Control Panel."
2. Double click "Add/Remove Programs," then, in the "Options" dialog box, select the "File Locations" tab.
3. Select "Install/Uninstall," click "Word in Works Suite Add-in" and click "Add/Remove."
4. Follow the on-screen instructions to remove the add-in that is causing the conflict with Word.
1. Launch Internet Explorer from your 'Start' menu.
2. Click on the 'Tools' menu and select 'Internet Options'.
3. Click on the 'Security' tab.
4. Click on the 'Custom Level...' button under 'Security level for this zone'.
5. Scroll down through the settings and locate 'ActiveX controls and plug-ins'.
6. Click to select 'Enabled' next to 'Run ActiveX controls and plug-ins'.
7. Click to select 'Enabled' next to 'Script ActiveX controls marked safe for scripting'.
8. Click on 'Apply'. Click on 'OK' to complete the task.
1. Go to the 'Start' menu, type 'run' in the 'Start Search' box and press 'Enter.'
2. Type 'regsvr32 'C:\Windows\System32\msxml3.dll' in the search field of the 'Run' window and press 'Enter' to register the DLL file.
3. Click 'OK' in the confirmation pop-up and then restart your computer.
1. Ensure that the application you are trying to run is indeed a Win32 application. If it was designed for an older version of Windows (prior to Windows 95) or for DOS, it may not run properly on a 32-bit version of Windows. Similarly, if it was designed for a 64-bit version of Windows Vista or Windows 7, it definitely will not run. Check the source from which you obtained the program for further details about the application.
2. Uninstall the application that Windows is calling invalid. Then, download and install the application again, if possible. If you are downloading the program from the Internet, make sure the source website is reliable and that the file you are downloading actually is an executable program. If you installed the application from a CD, make sure the disc is clean and undamaged.
3. Scan the file with a virus scanner of your choosing, as it is possible that the application has been infected by a computer virus.
4. Boot Windows in Safe Mode and try to run the program there. Restart your computer and hold down the 'F8' key as it boots. When the Advanced Options or Startup menu appears, choose 'Safe Mode.' If the program runs successfully in Safe Mode, then some other application running in the background of the normal Windows boot is preventing it from executing. Reboot your computer and use your virus scanner to fully scan your hard drives, especially if you are experiencing this problem with more than one program. Also, use a free spyware/malware scanner like Malwarebytes Anti-Malware, which can be downloaded from the link in the Resources section of this article.
1. Click the 'Start' button, and then click the 'All Programs' button.
2. Click the 'Accessories' icon, and then right click on the 'Command Prompt' icon.
3. Select 'Run as administrator' from the menu, and then enter your administrator password into the field.
4. Type 'sfc /scannow' into the command prompt. Press the 'Enter' key to start the scan.
5. Restart your computer after the scan has completed to clear your error.
Preparation
1. Remove the affected plant from the plant pot and set aside. Remove all other plants from the soil, because it is contaminated and will need to be replaced. Set the plant with root rot aside, away from the other plants.
2. Rinse the roots of the healthy plants in 75-degree water to remove the existing soil.
3. Mix sterilized drainage material like rocks, gravel or broken pieces of clay pot into your sterile soil to improve drainage. If you are using a container to grow your plants, put 2 to 3 inches of drainage material on the bottom of the pot to improve soil drainage.
4. Fill the container or growing area half full of soil and drainage mix. Gently place the plant in the planting area and hold it in place as you gently fill soil around its roots. Once the plant is stabilized and the growing container is full to within 1 to 2 inches of the top, give the soil a little pat to gently pack it in and even it out.
5. Water your newly replanted plant liberally and watch the water drain to make sure that its stagnant, root-rot encouraging water is no longer stopped up in your growing area.
Sterilizing soil
6. Sterilize the new soil. Preheat the oven to 200 degrees.
7. Place the soil in an oven bag like that which you would use to bake turkey and add a cup or two or water until the soil is moist, not runny. Seal the oven bag. Poke a meat thermometer into the soil at least 2 inches deep to measure the temperature.
8. Bake the soil at 200 degrees until the soil has been at 170 degrees for 30 minutes. If the soil begins to exceed 170 degrees before the time is up, turn the oven down or temporarily off to adjust the temperature.
9. Turn the oven off and allow the soil to cool inside the oven until it reaches a safe handling temperature; typically 110 degrees or below. The soil will be hot enough to burn you until it has been allowed to cool to this point.
10. Remove the soil from the oven and allow it to cool to room temperature before using it.
1. Open the 'Start' menu and type 'cmd' into the 'Search' box.
2. Click on the 'cmd' program that appears at the top of your Start menu.
3. Type in 'slmgr.vbs -ipk x' and press 'Enter,' where 'x' is your correct Windows Vista product key.
4. Type in 'slmgr.vbs -ato' to re-register the correct key, fixing the registration file.
5. Reboot your computer.
Verify Windows Update Settings
1. Press the 'Start' key and the 'R' key simultaneously to launch the Run box. Type in 'services.msc' (without the quotes) and click 'OK.'
2. Click 'Automatic Services.'
3. Select 'Local System Account' under the 'Log On' tab. Uncheck 'Allow service to interact with desktop.'
4. Click the 'General' tab and select 'Automatic' under 'Startup Type.'
5. Repeat Steps 2 to 4 for the Background Intelligent Transfer Service.
Windows Update DLLs
6. Press the 'Start' and 'R' keys at the same time to open the Run box.
7. Type in 'cmd' (without the quotes) and hit 'OK.'
8. Type in the following lines individually to register the files:REGSVR32 WUAPI.DLLREGSVR32 WUAUENG.DLLREGSVR32 WUAUENG1.DLLREGSVR32 ATL.DLLREGSVR32 WUCLTUI.DLLREGSVR32 WUPS.DLLREGSVR32 WUPS2.DLLREGSVR32 WUWEB.DLLRegister one at a time. Type in the next one after you receive a confirmation of your previous action.
Corrupted Windows Files
9. Press 'Start' and 'R' simultaneously.
10. Type 'cmd' (without the quotes) to launch the Command Prompt.
11. Type in the following commands, one at a time:net stop WuAuServcd %windir%ren SoftwareDistribution SD_OLDnet start WuAuServreboot
1. Determine that the DLL files are malicious or unnecessary before going forward. Removing a DLL file that pertains to the operating system or another program could cause the application or system itself to stop functioning.
2.
Press the 'Start' button and click 'Run.' In the 'Open' box, type 'cmd' and click the 'OK' button. The command prompt window will open.
3.
Type 'cd' and then press the space bar. Type in the complete file path of the DLL file. Press the 'Enter' key.
4.
Type 'regsvr32 /u' followed by a space and then the DLL name. Press the 'Enter' key. This will unregister the DLL file.
5. Run the antivirus and spyware removal programs on the computer to rid it of any remaining malicious files.
1. Download and install Registry Booster 2010 4.7.2.15 (see Resources). Run the set-up to finish the Registry Booster installation. Open the tool and click 'Registry Scan.' Scan your system for DLL errors. Click 'Fix Errors' once the scan is complete. Reboot your system.
2. Download and install Free Registry Cleaner 4.21.20 (see Resources). Run and complete the set-up. Open Free Registry Cleaner and click 'Scan Now' to detect the DLL errors. Click 'Fix all' once the scan is complete. Reboot your system once the repair is complete.
3. Download and install Cleanersoft Free Registry Fix 1.8 (see Resources). Complete the set-up and open the tool. Scan your entire registry for DLL errors. Select all the errors and click 'Fix 'Errors.' Reboot your system once the repair is complete.
1. Press 'Start' on your taskbar. Highlight and click on 'Search' from the 'Administrator' menu box. Select 'All files and folders' and under 'All or part of the file name' type '*.tmp' in the search box. Click the menu arrow and select 'Local Hard Drives (C:) and press the 'Search' button.
2. Wait for Windows to finish searching for the files and then delete the files that are displayed in the 'Search Results' box. This step will delete all of the temporary files on your computer.
3. Run Windows' 'Cleanmgr.exe' tool. Press the 'Start' button and select 'Run' from the menu box. Type 'cleanmgr' in the run command box. Next, click the 'OK' button. The tool will delete any unnecessary files that are on your computer's hard disk.
4. Use the 'System File Checker' utility to scan your computer and locate any corrupt or missing files. Press the 'Start' button and select 'Run' from the menu box. Next, type 'sfc/scannow' in the command box and press 'OK.' If the utility finds any missing or corrupted files, you may need to insert the Windows installation CD into your CD/DVD drive, so that the utility can replace the damaged or missing files.
5. Browse the Internet and search for a reputable registry software utility. For instance, RegCure can fix EXE and other types of errors that are affecting your computer's performance. Download and install the utility on your computer. Click on the RegCure icon to start the setup installation.
6. Run RegCure utility, so that it will scan your computer and fix the 'EXE' errors. The utility will repair and optimize your Windows registry.
1. Go to your 'C:\Program Files\Common Files\System\Mapi\1033' folder on your computer hard drive.
2. Double-click 'Scanpst.exe' to start your PST file repair tool.
3. Go to 'Start' then 'Search' and type '%appdata%\Microsoft\Outlook' in the search box. This enables you to see the location of the PST file on your machine.
4. Click 'Browse.' Choose the PST file you just viewed in the prior step.
5. Click 'Start' in Scanpst and allow the tool the time it needs to scan your file.
6. Back up your PST data. If you notice problems during the scan, mark the box to back up your data and determine where you want to store the file.
7. Push 'Repair.' Start your Outlook software once the recovery process concludes.
1. Click 'Start' and click 'All Programs.'
2. Select 'Accessories' and right-click 'Command Prompt.' Click 'Run as administrator.'
3. Type 'sfc /scannow' at the prompt and press 'Enter.' Allow the scan to detect and fix the corrupt and unreadable files.
4. Type the following commands at the prompt one at a time to determine the status of the corrupt file:findstr /C:'[SR] Cannot repair member file' %windir%\logs\cbs\cbs.log >sfcdetails.txtedit sfcdetails.txtA log will appear that contains an entry for the file(s) that did not repair.
5. Type the following commands at the prompt one at a time and press 'Enter:'takeown /f Path_And_File_Name(For example, takeown /f E:\windows\system32\jscript.dll)icacls Path_And_File_Name /GRANT ADMINISTRATORS:F(For example, icacls E:\windows\system32\jscript.dll /grant administrators:F)Copy Path_And_File_Name_Of_Source_FilePath_And_File_Name_Of_Destination(For example, copy E:\temp\jscript.dll E:\windows\system32\jscript.dll'
1. Remove any compatibility statements that are checked in the compatibility section of the system. To remove program compatibilities, navigate to the folder where the program is stored on the computer's hard drive, right-click the program name, hover over 'Properties' in the window that comes up and select 'Compatibility.' Uncheck any boxes that are checked in the window and click 'OK' for the changes to take effect.
2. Open the 'Start' menu and go to 'Control Panel.' Select 'Add/Remove Programs' or 'Uninstall a Program' from the menu. Scroll down the application list to the .NET frameworks. Right-click on each framework's name and click 'Uninstall' to remove each program from the computer.
3. Restart the computer to ensure that each .NET framework has been removed from the system. When the computer reloads, the frameworks will be gone.
4. Download the latest version of the .NET framework from Microsoft (see Resources). You will need only the one framework, as the features of the other frameworks will be automatically installed along with the newest version of the program, along with all of the necessary files and drivers.
5. Install the latest version of the .NET framework on the computer by double-clicking the setup icon in the 'Downloads' folder and following the instructions on the installation screens. Restart the computer and the framework will be installed on the system.
Preparation and Safe Mode
1. Write these instructions down on a notepad or piece of paper. Removing this threat will require multiple computer restarts and you may not be able to access this Web page again once the process has begun.
2. Download and install the Microsoft Malicious Software Removal Tool. MSRT is a free program developed by Microsoft to assist you in destroying virus and trojan infections.
3. Restart your computer by clicking 'Start' and 'Shut Down,' then selecting 'Restart.'
4. Press the 'F8' key repeatedly while your system reboots. This will trigger the Windows Advanced Options menu.
5. Select 'Safe Mode with Networking' and hit the 'Enter' key to load Windows in Safe Mode. Safe Mode is a protected operating environment that will allow you to tweak some settings that may have been guarded by the virus in normal Windows.
Disable System Restore and Fix Your Registry
6. Click the 'Start' menu and select 'Control Panel.' Double-click 'System' and choose the 'System Restore' tab.
7. Click the box next to 'Turn off System Restore.' System Restore is a safety mechanism that helps restore data in the event of a sudden crash or critical error but will work against you by accidentally repairing the files you destroy while removing W32/Mariofev.worm. Click 'OK' to save changes.
8. Open the Run prompt by clicking 'Start,' then 'Run.' Enter the command 'REGEDIT' and press 'Enter' to load the Windows Registry editor.
9. Press 'Ctrl' and 'F' simultaneously to load the search window. Enter 'SCNa' and press 'Enter' to find any entries by this name.
10. Right-click any registry entry that comes up with this search and click 'Delete.' This step ensures the virus cannot re-install itself after removal. Close the Registry editor when done.
Run MSRT and Remove the Threat
11. Open the Microsoft Malicious Software Removal Tool by double-clicking the icon on your desktop or selecting it in the 'All Programs' folder of your Start menu.
12. Click 'Next' to go to the 'Scan Type' window and select 'Full Scan.' While a quick scan will complete in less time, a full scan is recommended to ensure you remove all traces of W32/Mariofev.worm.
13. Click 'Next' to begin the scan. When complete, MSRT will show the results of your scan.
14. Remove any malicious files and folders discovered by MSRT by either allowing the software to removed them from your computer or by manual deletion. Be sure to empty your Recycle Bin.
15. Restart your computer. It should now be completely clear of W32/Mariofev.worm, and you will no longer receive alerts about the Patched User32 virus.
1. Click the 'Start' button and 'Control Panel.'
2. Click on 'Programs' and 'Programs and Features.'
3. Click on the pirated software in the menu that appears.
4. Click the 'Uninstall' button at the bottom of the screen.
5. Wait for the program to uninstall and then restart your system.
1. Use Spices.Decompiler (see Resources). Spices.Decompiler allows you to take any DLL on your computer and decompile it, or take it apart. You can then make edits to the contents of the DLL (if its an icon library) or make changes to the way the DLL operates (if it contains instructions). Spices.Decompiler is free to use for an unlimited period of time.
2. Use PE Explorer (see Resources). PE Explorer allows you to see exactly what is contained in a DLL without taking it apart first. If you determine that edits need to be made to its contents, you can then do so all from the PE Explorer program window. After editing, you must remember to recompile the DLL file. PE Explorer, like Spices.Decompiler, is free to use.
3. Use Resource Hacker (see Resources). Resource Hacker is a program that can edit the contents of DLLs as well as a wide variety of other Windows-based files. Resource Hacker is only equipped to deal with DLL files designed for the 32-bit version of the Windows operating system. As of January 2011, no version of Resource Hacker exists that lets you edit 64-bit DLLs.
1. Click the Windows-logo button on the lower-left-hand side of the screen. Type 'Run' in the 'Search' box.
2. Press 'Enter.'
3. Type 'regsvr32 path name' and press 'Enter,' replacing 'path' with the directory containing the DLL file and 'name' with the name of the DLL file.
1. Locate the link to the RegCure website (see Additional Resources below). RegCure is a program that will scan the computer's registry for errors. Once on the web page, scroll down to the bottom of the page and click 'Free Download.' You will be prompted to save the file and the download will begin.
2. Open the newly downloaded file. It will be an icon in the desktop or in a new 'Downloads' pop-up window. The RegCure installation wizard will initiate. Follow the wizard's prompts to complete the installation.
3. Launch the RegCure program. Either double-click the desktop icon or click 'Start,' 'All Programs' and then 'RegCure.'
4. Leave all the registry items checked. Click 'Scan.' RegCure will scan every file now associated with the registry. Once complete, choose for the program to remove all the problems. This deletes the DWWIN.exe error so that it won't appear.
1. Insert the Windows Vista disc. Wait until the install page appears.
2. Click "Install Now".
3. Click "Get Important Updates". This will ensure that you'll have the latest version of Vista when you reinstall.
4. Enter the product key found inside your Windows Vista packaging. Click "Next".
5. Select "I accept the license terms" and click "Next".
6. Select "Custom" for the installation type.
7. Install Windows to your C partition. This will fix any corrupted files you may have and recover and files that may be missing or were accidentally deleted.
8. Click "Next" to start the reinstallation.
1. Open Internet Explorer and select "Tools" at the top of the page.
2. Highlight "Pop-Up Blocker" and select "Turn Off Pop-Up Blocker."
3. Press "Ctrl," "Alt" and "Delete" on the keyboard simultaneously for third-party ad-blocking programs.
4. Click the "Processes" tab in the Task Manager window. Scroll through the list of programs until you find the ad-blocking program. Select it and click the "End Process" button.
1. Go to the Adobe Flash Player archive (see Resources).
2. Download the link entitled Flash Player 9; it will be a .zip file containing all the archived versions of Flash Player 9, as various versions may work with varying operating systems.
3. Open the downloaded .zip file, and then open the file titled readme.txt. From the options listed, choose the correct Flash Player to match your operating system. Choosing the latest version of Flash is suggested to avoid bugs and other issues.
4. Open the proper folder containing the right version of Flash. There will be two .dmg files in that folder, one with 'ub' in the name (as in 'flashplayer9xxxx_ub_mac.dmg') and one without. Double-click the file with 'ub' in the name and mount the disk image. Open the .pkg file and an installation program should load. This program will tell you how to install the Flash Player.
1. First, realize that this error is caused when you are attempting to start Eclipse using the wrong version of the Java Virtual Machine (JVM). So you need to realize what JVM you are starting with.
2. If you are using Linux, you can type "which java" on the command line. Otherwise, you can type "java -version". This will give you the Java version.
3. Now, you need to research the correct JVM for the version of Eclipse that you are using. For example, if you are using Eclipse Europa, it may require the 1.5 JVM to start. When you initially get the error message, you may see something that says "requiredJavaVersion=1.5", which will tell you what version of the JVM is required.
4. Make sure that you have the correct version of Java installed.
5. Now, you can either change the Java version environment variable or you can tell Eclipse to use a different version of the virtual machine upon startup. To do this you use the "vm" flag.For example: ./eclipse -vm /home/seed/app/jre1.5.0_10/bin
6. Now that you have changed the version of the Java Virtual Machine that you are using to start Eclipse, the error should be resolved. Good luck!
Install the Latest Version of DirectX Software
1. Navigate your Web browser to the Microsoft DirectX Downloads page (see Resources).
2. Click on the most recent version of the DirectX SDK. It is located under the 'Latest DirectX Release Notes' link.
3. Click 'Download' on the next page to download the installer. Save the file to an easily accessible place on your hard drive such as the desktop.
4. Double-click the installer file when it has finished downloading. Follow the on-screen instructions. You will be prompted to restart your computer after the download is complete.
Other Methods of Fixing D3d9.dll
5. Reinstall any game or application that was removed right before the DLL error started occurring.
6. Update a specific application or game if the DLL error only occurs within that application.
7. If D3d9.dll is missing, copy it from a computer with a similar configuration. Search for D3d9.dll by using the 'Search' feature in the 'Start' menu.
1. Go to the Microsoft Windows Script update page for a download that will correct the Runtime Error 429.
2. Click 'Download.' There will be a slight pause, then a new window will appear which asks if you want to save the file to the computer. Select 'Save File.' The update will now download to the computer.
3. Double-click the downloaded files icon. This will open the Microsoft installation wizard.
4. Follow the steps in the installation wizard to complete the setup. Once the installation is finished, there should be no more Runtime 429 errors.
1. Go to Adobe's official website and click the 'My Support' link at the top of the page.
2. Click the 'Adobe Flash Player' icon on the product support page.
3. Click the 'Flash Player Developer Center' link, which is located in the 'More Help' section. The 'Flash Player for end users' section will display Adobe's latest available version of Flash Player.
4. Click the 'Check Version' button to determine if you have Flash Player installed on your computer. If the software is installed, your version will be listed in the 'Version Information' box.
Browser Proxy Settings
1. Double-click the 'Internet Explorer' shortcut on your desktop to launch the browser. Click the 'Tools' menu and select the 'Internet Options' link from the menu. The 'Internet Options' dialog box displays onscreen.
2. Select the 'Connections' tab and the 'LAN Settings' button to launch the 'LAN Settings' dialog box.
3. Click the 'Use Proxy Server for your LAN' check box, if checked to remove the check mark, and then the 'OK' button twice to exit both dialog boxes.
Modified Host Files
4. Click the 'Start' button and type 'c:\windows\system32\drivers\etc\hosts' in the 'Search' box, then press the 'Enter' key on your keyboard to open the folder location.
5. Double-click the 'Hosts' file, select 'Notepad' on the 'Open With' window, and then click the 'OK' button to launch the file in Notepad.
6. Highlight all the GameGuard text entries and remove them by pressing the 'Del' key on your keyboard. Click the 'File' menu and select 'Save' from the drop-down menu, then exit Notepad to finish the process.
1. Right click on your task bar, which runs across the bottom of your screen. Choose 'Task Manager' from the submenu.
2. Click the 'Processes' tab and click on a file called 'ProgramFiles\ErrorRepairTool\ErrorRepairTool.exe.' Click 'End Process.'
3. Look for a file called 'setupxv[1].exe' and click on it. Click 'End Process' to delete it. Close the Task Manager window.
4. Go to 'Start' and then 'Run.' Type 'cmd' into the empty bar and press 'OK.' This loads the Command Prompt.
5. Type 'regsvr32 /u RegCleaner.dll' into the Command Prompt and press 'Enter.'
6. Type 'regedit' into the 'Run' box and press 'OK.' This loads the Registry Editor.
7. Go to 'Edit' and then 'Find' at the top of the Registry Editor's toolbar. Copy and paste each file name into the box and press 'Enter' to find it:HKEY_LOCAL_MACHINE\SOFTWARE\ErrorRepairToolHKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{2C94E4E3-3E09-4285-9F72-DA40F9C30E5C}ErrorRepairToolMicrosoft\Windows\CurrentVersion\Run\ErrorRepairToolMicrosoft\Windows\CurrentVersion\Uninstall\{C3185E34-3C04-4616-9FE0-89D70CF5DEB7}HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run\'ErrorRepairTool' = '%ProgramFiles%\ErrorRepairTool\ErrorRepairTool.exe -boot'HKEY_CURRENT_USER\Software\ErrorRepairToolHKEY_CLASSES_ROOT\Installer\Features\3E4E49C290E35824F927AD049F3CE0C5HKEY_CLASSES_ROOT\Installer\Products\3E4E49C290E35824F927AD049F3CE0C5HKEY_CLASSES_ROOT\Installer\UpgradeCodes\6D4A22EA0F76866418C9EF7DD18D3682
8. Right click each file when it loads and select 'Delete' or 'Modify' and then 'Delete,' depending on your operating system.
9. Go to 'Start' and then 'Search.' Copy and paste each file name into the box and press 'Enter.'C:\Documents and Settings\All Users\Desktop\ErrorRepairTool.lnkC:\Documents and Settings\All Users\Start Menu\Programs\ErrorRepairTool\ErrorRepairTool on the Web.lnkC:\Documents and Settings\All Users\Start Menu\Programs\ErrorRepairTool\ErrorRepairTool.lnk%ProgramFiles%\Downloaded Installers\{2C94E4E3-3E09-4285-9F72-DA40F9C30E5C}\setup.msi%ProgramFiles%\ErrorRepairTool\definitions.db%ProgramFiles%\ErrorRepairTool\ErrorRepairTool.url%ProgramFiles%\ErrorRepairTool\privacy.db%Windir%\Installer\16dcbee.msi%Windir%\Installer\{2C94E4E3-3E09-4285-9F72-DA40F9C30E5C}\Icon.exe%Windir%\Tasks\ErrorRepairTool Scan.job%UserProfile%\Application Data\ErrorRepairTool\Logs\[DATE FORMAT].log%UserProfile%\Application Data\ErrorRepairTool\Results\Evidence.db%UserProfile%\Application Data\ErrorRepairTool\Results\Junk.db%UserProfile%\Application Data\ErrorRepairTool\Results\Registry.db%UserProfile%\Application Data\ErrorRepairTool\Results\Update.db%UserProfile%\Local Settings\Temp\escan-parsed.log%UserProfile%\Local Settings\Temp\[RANDOM CHARACTERS].tmp
10. Click on each file name and press your 'Delete' key to remove it.
11. Close any open windows and then reboot your computer.
Re-register the Files
1. Press the Windows button on the keyboard plus the 'R' button.
2. Type 'cmd' in the 'Open' dialog box and click 'OK.' This opens the Command Prompt.
3. Paste the following the commands in the prompt, individually, and press 'Enter:'regsvr32 jscript.dllregsvr32 vbscript.dll
4. Type 'Exit' and then press 'Enter.'
Run Registry Editor
5. Press the Windows button and type 'regedit' in the 'Start Search' dialog box. Press 'Enter.' This opens the Registry Editor.
6. Navigate the following registry path on the left side of the window:HKEY_LOCAL_MACHINE >> SOFTWARE >> CLASSES >> CLSID >> {f414c260-6ac0-11cf-b6d1-00aa00bbbb58} >> InprocServer32
7. Double-click the 'Default' entry and click 'Modify.'
8. Type 'C:\WINDOWS\SYSTEM32\JSCRIPT.DLL' in the 'Value Data' box. Click 'OK.'
9. Double-click the entry 'ThreadingModel' and click 'Modify.' Ensure that the 'Value Data' box reads 'Both.' If it doesn't, type 'Both' in the 'Value Data' box. Click 'OK.'
1. Double-click the 'Internet Explorer' icon on the desktop to start the browser. Click the 'Tools' menu option.
2. Click the 'Security' tab in the Internet Options window. Click 'Internet' icon and then 'Custom level' to start the 'Security Settings - Internet Zone' window.
3. Scroll down to 'ActiveX controls and plug-ins' section.
4. Check 'Enable' for 'Download signed ActiveX controls' and 'Run ActiveX controls and plug-ins.' Check 'Prompt' for 'Download unsigned ActiveX controls.'
5. Click 'OK' to close the Security Settings window and then 'OK' in the Internet Options window.
Instructions
1. Go to 'Start' on your taskbar and select 'Run.' A pop=up window will appear to open the 'Run' tool. Type the letters 'cmd' in the search box and press 'OK.'
2. Look for the DLL file name in the search results listing and examine the file path for the DLL file. Most DLL files on Windows Vista are located in the file path: 'C:\Windows\System32' or sometimes in the subfolder, 'C:\Documents and Settings.'
3. Unregister the DLL file from the directory. Type 'regsvr32 /u C:\filepath\DLL_filename' in the command prompt. The text 'filepath' and 'DLL_filename' are shown as placeholders and you should substitute this information with a specific file path and DLL file name that you want to unregister.
4. Press the 'Enter' key after typing the command. This will unregister and delete the DLL file from the Windows file registry. Avoid deleting system or shared DLL files that may be used by other programs. Your computer could crash, and you may lose important data. Make sure that you back up or rename any DLL files that you plan to unregister and delete from the Windows file registry.
5. Download the latest version of any deleted or missing DLL files from the internet. Reinstall the files onto your computer and copy the DLL files in the file path 'C:\Windows\System32.'
1. Find out what kind of .exe file is corrupted and download it again. For example, if your program installer is corrupted, you will need to download it from your Microsoft Windows XP CD.
2. Insert the CD into your CD-ROM.
3. Click 'Start' and 'Restart' to reboot your computer.
4. Press any key to activate the CD as the computer is loading up.
5. Select the 'R' key on your keyboard to access the recovery console.
6. Select the operating system that needs to be repaired and enter the administrator password.
7. Type 'Expand d:\i386/ntoskrnl.ex_ C:\Windows/System32'.
8. Overwrite the 'Y' file and press 'Enter'.
9. Type 'Exit' to reboot and restart the computer.
10. Search the Microsoft website and look for the .exe file you wish to repair if you know which file it is or don't have the CD. The CD will restore all of your computer's .exe files, but this is a process you don't need to go through if you know specifically what you need to repair. Microsoft has specified different instructions for the many .exe files available. The instructions, however are very detailed, difficult and time-consuming.
1. Open “My Computer” on the desktop.
2. Navigate the following folder path to open the location of the mfc71u.dll file:C >> Windows >> System32
3. Open the Web browser. Navigate to the website in Resources. Select the “Download Now” link to install the mfc71u file. Save it to your desktop.
4. Drag the file to the System32 folder, and choose “Yes” to replace it with the damaged file.
5. Click “Start” and open “Run.”
6. Type “regsvr32 mfc71u.dll” in the dialog box. Click “OK” to register the file.
1. Go to the free DLL download website (see Resources) and click \"Download RASAPI32.DLL\" under \"Free Download.\"
2. Click \"Save File\" in the confirmation pop-up to begin the download. Double-click the saved ZIP file and WinZIP or WinRAR will launch and decompress the file automatically.
3. Right-click the \"Rasapi32.dll\" file and select \"Copy.\" Go to the \"Start\" menu, select \"My Computer,\" double-click the \"C:\" drive, open the \"Windows\" folder and then the \"System32\" folder. Right-click anywhere in a blank space and select \"Paste.\" Click \"Yes\" in the pop-up window to replace the existing file (if any).
4. Go to the \"Start\" menu, select \"Run\" and type the following: <br /><br />regsvr32 \"C:\\Windows\\System32\\Rasapi32.dll\" <br /><br />Click \"OK.\" Click \"Yes\" in the pop-up window to register the file.