1. Press 'Esc,' 'Shift' and 'Ctrl' at the same time to open the Windows Task Manager.
2. Click the 'Processes' tab. Select 'crypt32.dll' or 'crypt32.exe,' and click 'End Process.'
3. Exit the Windows Task Manager.
Remove the Files
4. Click 'Start.' Type 'Windows Explorer' in the search box and press 'Enter.' This opens the Windows Explorer.
5. Type 'crypt32' in the search box, and press 'Enter.'
6. Right-click each file one at a time and click 'Properties.' Verify the file location of the file. You are going to remove the crypt32 files that exist outside of the System32 folder.
7. Right-click each file, and click 'Delete.'
1. Place your 'Call of Duty 4' CD-ROM into your computer.
2. Click 'Start.' Open the 'Computer' folder. Right-click on the 'Call of Duty' CD-ROM icon and click 'Explore.' Locate the file labeled 'IW3sp.exe.' Drag the file onto your hard drive to make a copy on your computer. Close the window.
3. Click 'Start.' Open 'Computer' again and then 'Program Files.'
4. Open the 'Activision' folder and select the 'Call of Duty 4 -- Modern Warfare' directory. Open the folder labeled 'Zone' and then the folder inside that folder labeled 'English.' Drag the copy of the IW3sp.exe file you copied to your desktop into this directory. This will replace the corrupted file and allow you to play the game again.
1. You should first reboot your computer, since HAL.DLL errors are not always real threats, and might stop after a simple reboot.
2. HAL.DLL errors might be caused simply by an improper booting order in your BIOS configuration. You should make sure that the system disk is the first source of boot-up on your computer.
3. If you run the right version of Windows, you might actually have System Restore on your computer. Run this to restore to an older point before these HAL.DLL errors started appearing. Perhaps this might solve your problem.
4. Boot up your computer using your Windows Installation Disk, and when you receive the 'Welcome to the Setup' message, press 'R.' This will start the recovery console. Write the administrator password and press 'Enter,' and then type 'bootcfg /list' and press 'Enter.' After that, do the same thing, only this time, typing 'bootcfg /rebuild.'
5. If all goes wrong, you still have three more options. You can either restore the HAL.DLL file from the Windows disk (in other words, copying the file and overwriting the old HAL.DLL), you can run a repair installation of Windows (if this is available on your version of windows), or you will have to, as a last resort, run a clean, new installation of Windows.
1. Click on the 'Start' menu and open 'Computer.' If you are using Windows XP or 2000, it will appear open the 'My Computer' shortcut on the desktop. Click on the 'Tools' menu and open 'Folder Options.'
2. Click on the 'View' tab in Folder Options. Clear the box next to 'Hide extensions for known file types' as well as 'Hide protected operating system files [Recommended].'
3. Click 'OK' and 'Apply' in the Folder Options window. Type 'winsrv.dll' into the search box on the top-right corner of the window. If you are a Windows XP or 2000 user, access the 'Search' tool by opening the 'Start' menu and opening the Search tool. You may have to repeat Step 2 in the Search window if 'winsrv.dll' does not display with the Search tool.
Repair Internet-based Script Errors
1. Click on 'Start,' 'Settings' and 'Control Panel.'
2. Double-click 'Internet.'
3. Click on 'Fonts' on the default 'General' tab.
4. Select 'Western' in the 'Character Sets' section, then click on 'Set as Default.' Click 'OK.'
5. Click on the 'Delete Files' button back on the 'General' tab of the Internet Properties box. Click 'OK' twice.
6. Download and install Internet Explorer 6 Service Pack 1, or uninstall and reinstall if Internet Explorer 6 Service Pack 1 is currently installed on your computer. Please see Resources.
Repair Web View-based Script Errors
7. Click on 'Start,' then 'Windows Explorer.'
8. Navigate to the folder that causes script errors to appear.
9. Click on 'View' in the menu bar. Select 'Customize This Folder,' then click 'Remove Customization.'
10. Click 'Next,' then 'Finish.'
11. Reinstall Windows 98 if you continue to receive script errors when viewing Windows folders to refresh the Windows Desktop Update feature.
1. Write the specific file name down when Windows detects the missing or corrupt file. This will appear in a dialog box.
2. Scan your system with the System File Checker (SFC) utility, which is built into XP Professional. It will search for the damaged DLL files and replace them with the original versions. (If the SFC cannot locate the files, it will prompt you to insert the Windows installation CD.) Click Start, then select Run from the menu options. When the command prompt appears, type in 'SFC /SCANNOW.'
This scan could take 30 minutes or longer. When the scan is complete, reboot your computer. You have solved the problem if the error message is gone. If it is still there, proceed to the next step.
3. Download the missing DLL file from the resource webpage link. Search the webpage for the exact DLL file that is missing from your system, and click on the link to download the file to the Windows desktop. Use an unzip utility program to extract the DLL file and readme text. You will find several free unzip utilities on the Internet; refer to your particular program's documentation on how to extract ZIP files.
4. Open the readme text file after extracting the files to your desktop by double clicking on it. The readme file will show you where you will need to move the DLL file in order for it to work properly. Click on the 'Start' botton and choose 'My Computer' to open up Windows Explorer. Click on 'Local Drive C:' to access your computer system files.
5. Locate the appropriate system folder in your computer's hard drive that will contain the DLL file (refer to the readme file for the correct file path). Once you have found the correct file folder, click and hold the left mouse button over the new DLL file on your desktop, and drag and release the file into the proper system folder using the mouse.
1. Make sure you have enough disk space on the device you're trying to move the files to. After deleting files, the problem will most likely be resolved.
2. If that doesn't work, create another file folder on the device you're trying to copy the files to. Then copy the files into the new folder.Sometimes storage devices get finicky if there are too many files in one folder or if the file names are too long. Copying the files into another folder on the same device can get around this issue.
3. Restart your computer, which might free up RAM that is preventing the file from being moved.
1. Click 'Start' and click 'Run.'
2. Type 'cmd' in the 'Open' text box, and click 'OK.' This opens the command-line utility.
3. Type 'sfc/scannow' without the quotes. The System File Checker checks your system for damaged DLL files. Once done, it provides you with a list of corrupted files and indicates whether it was able to repair them.
4. Type 'Exit' in the command window to close it when finished with the scan.
1. Find the incorrect reference variable by appearance. For example, an Object Variable uses a dot (Hello.value=1) and a Normal Variable does not. The correct variable type needs to be used for the correct situation.
2. Change the incorrect variable to fit the situation. For example, a shared variable can be used for a variety of instances within a class while a local variable will be used independently for the instance it was created.
3. Run and test the program by connecting to the Internet, click 'Debug' and then 'Start Debugging.' This will run the program.
4. Repeat Steps 1 through 3 if Error 424 still appears.
1. Turn on your computer if you haven't done so already and put your Windows installation CD/DVD into your computer's disc drive once your computer is loaded.
2. Click 'Start' and select the search bar at the bottom of the menu.
3. Type the following command in the 'Run' dialog:expand d:\i386\rundll32.ex_ %windir%\system32\rundll32.exe.This automatically expands the content of the 'Rundll32' process within your Windows installation disc and copies it to your system folder, giving you a fresh copy.
4. Restart your computer.
1. Open Internet Explorer.
2. Click 'Tools.'
3. Select 'Manage Add-Ons.'
4. Choose 'Downloaded Controls.'
5. Scroll through the list of ActiveX controls until you find the ones you wish to remove. Click 'More information' and click 'Remove.'
1. Click 'Start,' type 'cmd' into the search field and press 'Enter' to open the Command Prompt.
2. Type the following commands into the Command Prompt. Press 'Enter' after each command.regsvr32 /u googlenav.dlldel googlenav.dll
3. Type 'exit' and press 'Enter' to close the Command Prompt.
1. Navigate in your web browser to the the 'Remote Desktop Connection Software Download' page (see Resources).
2. Click the 'msrdpcli.exe' link on the right of the page.
3. Select 'Save' and save the file to your Desktop.
4. Double-click the file and select 'Run' to reinstall the software, repairing your Remote Connection service.
1. Boot your computer in Safe Mode: Upon restart, click F8 to enter the boot-method menu. Select 'Boot in Safe Mode with Networking. ' When Windows boots, click 'OK' when prompted that you are booting in Safe Mode.
2. Close all programs except for your browser. Visit the link in Resources labeled 'WinSock Fix Download' to download the freeware WinSock fix. Wait a short time for your download to be completed.
3. Click 'Save File' when you are asked what to do with the file. The file will be saved to your default download location--usually the desktop or 'Downloads' folder within your 'My Documents' folder (click 'Start' at the lower left of your screen).
4. Reboot your computer in normal mode (simply allow it to boot regularly).
5. Locate the downloaded WinSock XP Fix file and double-click it to install and run it.
6. Click 'Run' at the security warning window.
7. Click 'Fix' when WinSock XP Fix opens. Click 'Yes' when asked to apply the fix.
8. Click 'OK' when you are prompted that the fix is complete and you need to reboot. Allow your computer to reboot.
1. Insert the original installation CD for the program that has stopped working. Locate the missing .DLL file and copy it to the Windows desktop. If you are unable to find the file, type its name into an Internet search engine. The results will include several websites that host .DLL files for downloading. Download the file and save it to your desktop.
2. Double-click on the 'My Computer' icon, then double click 'C:,' 'Windows' and 'System32.' Depending on your security settings, you may need to click through warnings in order to view the contents of these folders.
3. Drag the .DLL file from the desktop to the System32 folder.
4. Hit the 'Windows' and 'R' keys on the keyboard simultaneously to bring up the 'Run' dialog box.
5. Type 'cmd' in the 'Run' box and hit 'Enter.' This will bring up the Windows command prompt.
6. Type 'regsvr32 (filename).dll', using the name of the file that you are installing, into the command prompt. Hit 'Enter.' You should receive a message indicating that the .DLL file has been successfully registered.
1. Download and save the usp10.dll to the C:\Windows\System32 folder once the window appears asking where you want to install the file (See Resources). Choose to replace the existing file if the window appears asking if you want to replace it.
2. Press 'R' and the 'Windows' key at the same time to open the Run tool.
3. Type 'regsvr32 usp10.dll' in the open field and click 'OK.' This will register the file. Restart your computer for the changes to take effect.
1. Open the Start menu and click on the 'Internet Explorer' icon.
2. Go to the MSN Games homepage (see Resources below) in the browser window.
3. Click on the name of the online game that you want to play. A yellow bar will appear at the top of your browser window, instructing you to install the Active X Control.
4. Click on the yellow bar at the top of the window and choose 'Install Active X Control.' A pop-up security warning will now open.
5. Click 'Install' in the security warning window. The installation process will now begin and should take less than five minutes. When the Active X Control installation has completed, you will be able to play MSN Games on your browser.
Install Service Pack 3
1. Go to the Microsoft Download Center at Microsoft.com and download the stand-alone update package for Service Pack 3 to your system. Click the 'Download' button on the page to continue.
2. Click the 'Start Download' link on the page if the download does not start within 30 seconds.
3. Click the 'Save File' button and then select a location for the saved file. Click the 'Save' button to begin the download.
4. Double-click on the downloaded file to install or reinstall Service Pack 3 on your system. Restart your computer, if prompted, and then try to run Internet Explorer 6 again.
File System Checker
5. Click the 'Start' button and then go to the 'All Programs' option. Go to the 'Accessories' program group and select the 'Command Prompt' option.
6. Type 'cd..' and press the 'Enter' key. Repeat this step to go to the root of the C drive.
7. Type 'sfc /scannow' and then press the 'Enter' key. Wait while the File System Checker scans your system.
8. Close the command prompt window when the File System Checker completes the scan and then restart the computer.
1. Click 'Start,' click 'Computer' and then right-click on the NTFS hard drive that you want to repair.
2. Click 'Properties,' click 'Tools' and then click 'Check Now.'
3. Check the 'Automatically fix file system errors' and 'Scan for and attempt recovery of bad sectors' options and then click 'Start.'
1. Go to DllDump website (see Resources) and click on \"Click Here to Download user32.dll.\" Click on \"Save\" in the confirmation pop-up to begin the download.
2. Right-click the saved DLL file and select \"Copy.\"
3. Go to the \"Start\" menu, select \"Computer\" or \"My Computer,\" double-click the \"C:\" drive, double-click the \"Windows\" folder and then the \"System32\" folder. Right-click anywhere in a blank space and select \"Paste.\" Click on \"Yes\" in the confirmation pop-up to replace the existing user32.dll (if any).
4. Click the \"Start\" menu and select \"Run.\" Type \"Regsvr32 \"C:\\Windows\\System32\\user32.dll\"\" and hit \"Enter.\" Click on \"OK\" in the confirmation pop-up to register the DLL and restart your computer.
